3Com Baseline 2928 PWR Plus User Manual page 243

Figure 1-1 Create a link aggregation group
Table 1-4 describes the configuration items of creating a link aggregation group.
Table 1-4 Configuration items of creating a link aggregation group
Item
Enter Link Aggregation Interface
ID
Specify Interface Type
Select port(s) for the link
aggregation interface
Return to Static aggregation group configuration task
Return to Dynamic aggregation group configuration task
Assign an ID to the link aggregation group to be created.
You can view the result in the Summary list box at the bottom
of the page.
Set the type of the link aggregation interface to be created:
Static (LACP Disabled)
Dynamic (LACP Enabled)
Select one or multiple ports to be assigned to the link
aggregation group from the chassis front panel.
You can view the result in the Summary list box at the bottom
of the page.
list.
list.
1-6
Description