Modifying Ports - 3Com Baseline 2928 PWR Plus User Manual

Modifying Ports

Select Network > VLAN from the navigation tree and click Modify Port to enter the page for modifying
ports, as shown in
Figure 1-7 The Modify Port tab
Table 1-6 describes the configuration items of modifying ports.
Table 1-6 Configuration items of modifying ports
Item
Select Ports
Untagged
Tagged
Select
memb
ership
type
Not A
Member
VLAN IDs
Figure 1-7.
Select the ports to be modified.
Click the ports to be modified on the chassis front panel. You can select one
or more ports. If aggregation groups are configured on the device, the page
displays a list of aggregated ports below the chassis front panel. You can
select ports from this list.
Set the member type of the ports to be modified in the specified VLANs.
Select the Untagged, Tagged, or Not A Member radio button:
Untagged: Assigns the selected prots to the specified VLANs as untagged
members. After that, the ports send the traffic of those VLANs with the
VLAN tags removed.
Tagged: Assigns the selected prots to the specified VLANs as tagged
members. After that, the ports send the traffic of those VLANs without
removing the VLAN tags.
Not A Member: Removes the selected ports from the specified VLANs.
Set the IDs of the VLANs to/from which the selected ports are to be
assigned/removed. This item is available when the Untagged, Tagged, or
Not A Member option is selected in the Select membership type area.
Description
1-8