3Com Baseline 2928 PWR Plus User Manual page 377

Enter the primary server UDP port number 1813.
Select active as the primary server status.
Click Apply to finish the operation.
# Configure the scheme to be used for communication between the switch and the RADIUS servers.
Select the RADIUS Setup tab to enter the RADIUS parameter configuration page.
Figure 1-26 RADIUS parameter configuration
Perform the following configurations as shown in
Select extended as the server type.
Select the Authentication Server Shared Key checkbox, and enter abc in the textbox.
Enter abc again in the Confirm Authentication Shared Key textbox.
Select the Accounting Server Shared Key checkbox, and enter abc in the textbox.
Enter abc again in the Confirm Accounting Shared Key textbox.
Select without-domain as the username format.
Click Apply to finish the operation.
3) Configure AAA
# Create an ISP domain.
From the navigation tree, select Authentication > AAA. The domain setup page appears.
Figure 1-26.
1-22