Port Management Configuration; Configuring A Port - 3Com Baseline 2928 PWR Plus User Manual

1

Port Management Configuration

Overview
You can use the port management feature to set and view the operation parameters of a Layer 2
Ethernet port, including but not limited to its state, rate, duplex mode, link type, PVID, MDI mode, flow
control settings, MAC learning limit, and storm suppression ratios.

Configuring a Port

Setting Operation Parameters for a Port
Select Device > Port Management from the navigation tree, and then select the Setup tab on the page
that appears to enter the page as shown in
Figure 1-1 The Setup tab
Figure 1-1.
1-1