Configuring Service Management - 3Com Baseline 2928 PWR Plus User Manual

Encrypts the data exchanged between the HTTPS client and the device to ensure the data security
and integrity, thus realizing the security management of the device;
Defines certificate attribute-based access control policy for the device to control the access right of
the client, in order to further avoid attacks from illegal clients.

Configuring Service Management

Select Network > Service from the navigation tree to enter the service management configuration
page, as shown in
Figure 1-1 Service management
Table 1-1 shows the detailed configuration for service management.
Table 1-1 Service management configuration items
Item
Enable FTP
service
FTP
ACL
Enable Telnet
Telnet
service
Enable SSH
SSH
service
Figure 1-1.
Specifies whether to enable the FTP service.
The FTP service is disabled by default.
Associates the FTP service with an ACL. Only the clients that pass
the ACL filtering are permitted to use the FTP service.
You can view this configuration item by clicking the expanding
button in front of FTP.
Specifies whether to enable the Telnet service.
The Telnet service is disabled by default.
Specifies whether to enable the SSH service.
The SSH service is disabled by default.
Description
1-2