3Com Baseline 2928 PWR Plus User Manual page 179

Modifying a VLAN Interface
After you modify the IPv4 address for a selected VLAN interface on the page for modifying VLAN
interfaces, you need to click the correct Apply button to submit the modification.
After you change the IP address of the VLAN interface you are using to log in to the device, you will
be disconnected from the device. You can use the changed IP address to re-log in.
Select Network > VLAN Interface from the navigation tree and click Modify to enter the page for
modifying a VLAN interface, as shown in
Figure 1-2 The Modify tab
Table 1-3 describes the configuration items of modifying a VLAN interface.
Table 1-3 Configuration items of modifying a VLAN interface
Item
Select VLAN
Interface
Figure
Select the VLAN interface to be configured.
The VLAN interfaces available for selection in the drop-down list are those
created on the page for creating VLAN interfaces.
1-3
1-2.
Description