Move Digit: Movd - Omron SYSMAC CJ - REFERENCE MANUAL 01-2008 Reference Manual

Data Movement Instructions
Description
Flags
Examples
3-8-6

MOVE DIGIT: MOVD(083)

Purpose
Ladder Symbol
Variations
Applicable Program Areas
340
MOVB(082) copies the specified bit (n) from S to the specified bit (m) in D.
The other bits in the destination word are left unchanged.
Note The same word can be specified for both S and D to copy a bit within a word.
Name
Error Flag ER
When CIO 000000 is ON in the following example, the 5
word (CIO 0200) is copied to the 12
accordance with the control word's value of 0C05.
Transfers the specified digit or digits. (Each digit is made up of 4 bits.)
MOVD(083)
S
C
D
Variations Executed Each Cycle for ON Condition
Executed Once for Upward Differentiation
Executed Once for Downward Differentiation Not supported
Immediate Refreshing Specification
Block program areas
OK
Label
ON if the rightmost and leftmost two digits of C are not
within the specified range of 00 to 0F.
OFF in all other cases.
th
bit of the destination word (CIO 0300) in
1 2
S: Source word or data
C: Control word
D: Destination word
Step program areas
OK
Section 3-8
Operation
th
bit of the source
0 5
MOVD(083)
@MOVD(083)
Not supported
Subroutines Interrupt tasks
OK OK