Omron CX-PROCESS TOOL V5.2 - REV 10-2010 Operation Manual page 81

Installing and Uninstalling the Software
54
Select the destination location and click the Next Button. By default, the CX-
Process Tool will be installed in the following location: C:\Program
Files\OMRON\CX-One\CX-Process Tool\.
6. The Setup Type Dialog Box will be displayed.
Select the Complete or Custom Option and click the Next Button.
7. The Select Features Dialog Box will be displayed if Custom was selected.
Note The above dialog box will not be displayed if Complete is selected.
Proceed to step 8.
Select the features to be installed and click the Next Button.
Options
Note Only the CX-Server can be installed at the same time as the CX-Process Tool. To
use FinsGateway as the communications server, refer to 2-1-5 Installing Fins-
Gateway.
Section 2-1