Omron CX-PROCESS TOOL V5.2 - REV 10-2010 Operation Manual page 110

Overview of User Interface
Menus in Edit Block Diagram Mode
Main Menus
Menu
View FB Registration Bar
Scale
100%
200%
50%
Zoom In
Zoom Out
Change Mode g Grid Mode
CSV Tag mode
Manipulate p Setting g
FBD FBD O Operation i
Order Order
Copy FBD
Selected
A Annotation i
Undo
Validate
Start
Action A i
Exit
Select the block diagram first, and then select Edit - Edit Block Diagram from
the Settings Menu so that the CX-Process Tool will enter Edit Block Diagram
Mode. The following menus will be displayed.
Command
Displays or hides the function block registration bar.
Displays the block diagram in actual size (default).
Displays the block diagram at 200% size.
Displays the block diagram at 50% size.
Zooms in to the block diagram.
Zooms out from the block diagram.
Grid OFF Turns OFF the grid display.
Switches the grid to a wide grip.
Wide
Middle Switches the grid to a midsize grid.
Narrow Switches the grid to a narrow grid.
If CSV tags have been set, the CSV tag name is displayed as the
function block name when a function block is pasted in the block
diagram.
Common Sets the execution cycle for all function blocks in a function block
diagram. di
0.01 sec
0.02 sec
0.05 sec
0.1 sec
0.2 sec
0.5 sec
1.0 sec
2.0 sec
Download Downloads only the function blocks actually set above to the Loop
Controller.
Copies the entire block diagram (function block group). The block
diagram that was copied can be used as follows:
If an LCU/LCB element is selected, the pop-up menu is accessed by
double-clicking, and Block Diagram/Paste is selected, the Block
Diagram Dialog Box will be displayed.
If a function block group number and title are input and then the OK
button is clicked, the block diagram that was copied will be added as a
new function block group.
Edit Edits the selected annotation.
Delete Deletes the selected annotation.
Bring to Front Displays the selected annotation in front of other annotations.
Send to Back Displays the selected annotation behind other annotations.
Send Behind Makes the selected annotation transparent.
Blocks and
Lines
Font Size Changes the selected annotation's font size.
Reverses (undoes) the last operation.
Starts checking the operation of software connections.
Ends checking the operation of software connections.
Description
y
Section 2-2
83