Omron CX-PROCESS TOOL V5.2 - REV 10-2010 Operation Manual page 185

Using SCADA Software
Procedure for Starting Face Plate Auto-Builder for NS (NSFP)
1, 2, 3...
158
1. Install NSFP version 2.0 or higher in the personal computer beforehand.
2. Set the CSV tags for each function block using the CX-Process Tool.
3. Select Create Tag File Start NSFP from the Execute Menu, or click the
icon in the toolbar.
4. CSV tags will be compiled.
5. When the tag compilation has been completed normally, the NSFP will start
automatically.
6. The path to the CSV tag file created in step 4 will be automatically specified
in the CSV Tag File field in the NSFP parameter settings screen.
Note This function requires NSFP version 2.0 or higher.
Section 3-4