Troubleshooting - Omron CX-PROCESS TOOL V5.2 - REV 10-2010 Operation Manual

Troubleshooting

5-1 Troubleshooting
Error Codes
318
This section provides information on error codes generated during online opera-
tion of the CX-Process Tool, along with probable causes of the errors and reme-
dies to be taken.
An error code (FINS response code) appears under each error message as
shown below. The cause of the error can be determined from the error code.
Example
Section
Error code (FINS response code)
Error code (FINS response code)
5-1