Omron CX-PROCESS TOOL V5.2 - REV 10-2010 Operation Manual page 314

Operation Check
Changing Set Values, Adding, and Deleting Elements (Timers and Counters) during Operation
288
Action Validation on the Element Screen
The present value is displayed in parentheses after TIM/CNT and the
element number. In this example, the present value of TIM 000 is 47.
Action Validation on the Sequence Table Screen
The present value is displayed in parentheses after TIM/CNT and the
element number. In this example, the present value of TIM 000 is 100.
Changing Set Values
The set value of a timer or counter can be changed while the Loop Controller and
sequence table are operating.
Section 4-6