Emc Compliance Declaration; Emc Regulations - INVT Goodrive390L Series User Manual

Goodrive390L Series Lift-Dedicated VFD
C.4.2 EMC compliance declaration
European union (EU) stipulates that the electric and electrical devices sold in Europe
cannot generate electromagnetic disturbance that exceeds the limits stipulated in
related standards, and can work properly in environments with certain electromagnetic
interference. The EMC product standard (EN 61800-3, EN12015, EN12016) describes the
EMC standards and specific test methods for such system products. Our products have
been compliant with these EMC regulations.
C.5 EMC regulations
The EMC product standard (EN 61800-3) describes the EMC requirements on VFDs.
Application environment categories:
First environment: Civilian environment, including application scenarios where VFDs are
directly connected to the civil power supply low-voltage grids without intermediate
transformers.
Second environment: All locations outside a residential area.
VFD categories:
Category C1: VFD of rated voltage lower than 1000V, applied to the first environment.
C2: Rated voltage lower than 1000V, non-plug, socket, or mobile devices; power drive
systems that must be installed and operated by specialized personnel when applied to
environments of Category I.
Note: The product may generate radio interference in some environments, and you
need to take measures to reduce the interference.
Category C3: VFD of rated voltage lower than 1000V, applied to the second environment.
They cannot be applied to the first environment.
Note: VFDs of category C3 cannot be applied to civilian low-voltage public grids. When
applied to such grids, the VFD may generate radio frequency electromagnetic
interference.
Category C4: VFD of rated voltage higher than 1000V, or rated current higher or equal to
400A, applied to complex systems in the second environment.
Note: The EMC standard IEC/EN 61800-3 no longer restricts the power distribution of
the VFD, but defines the use, installation, and commissioning of the VFD. Specialized
personnel or organizations must have the necessary skills (including the EMC-related
knowledge) for installing and/or performing commissioning on the electrical drive
systems.
202403 (V1.0）
Technical data
142