Appendix F Function Parameter List; Group P00-Basic Functions - INVT Goodrive390L Series User Manual

Lift-dedicated vfd

Table of Contents

Goodrive390L Series Lift-Dedicated VFD

The function parameters of the VFD are divided into groups by function. Among the

function parameter groups, the P98 group is the analog input and output calibration

group, while the P99 group contains the factory function parameters, which are user

inaccessible. Each group includes several function codes (each function code identifies a

function parameter). A three-level menu style is applied to function codes. For example,

"P08.08" indicates the 8th function code in the P08 group. The VFD supplies the password

protection function. For detail settings, see P07.00. The parameters adopt the decimal

system (DEC) and hexadecimal system (0–F). If the hexadecimal system is adopted, all

bits are mutually independent on data during parameter editing. The symbols in the

table are described as follows:

"○" indicates that the value of the parameter can be modified when the VFD is in

stopped or running state.

"◎" indicates that the value of the parameter cannot be modified when the VFD is in

running state.

"●" indicates that the value of the parameter is detected and recorded, and cannot be

modified. (When "Restore factory settings" is performed, the actual detected parameter

values or recorded values will not be restored.)

Group P00—Basic functions

Function

code

P00.00

Speed control mode

Channel of running

P00.01

commands

202403 (V1.0）