Terminal Interfaces And Switches - INVT Goodrive390L Series User Manual

Goodrive390L Series Lift-Dedicated VFD
encoder signal is transmitted at a long distance, you can adjust the output power supply
voltage by potentiometer (the regulation method is the same as incremental encoder
card) to increase the wiring distance.
A.4.2 Terminal interfaces and switches
The Sin/Cos encoder PG card has one 2*6P and one 2*4P user terminals, as shown in
Figure A-10.
A+
GND PWR
Note:
The PG card does not internally connect the PE to the earth, and you can connect the

PE to the earth during use.
202403 (V1.0）
Figure A-10 Ports and terminals of PG card
A- B+ B-
R+ R- D+
Table A-6 Terminal description
Symbol
PWR
GND
A+
A-
B+
B-
C+
C-
D+
D-
R+
R-
OA+
OA-
OB+
OB-
OA
OB
COM1
OA+
C+ C-
D-
Function description
Encoder signal input terminal
5V differential crossover signal output
Open collector frequency-divided signal
Expansion card
OA- OB+ OB-
OA OB COM1
Encoder power
terminal
output terminal
136