How To Set The Vfd User Password - INVT Goodrive390L Series User Manual

Goodrive390L Series Lift-Dedicated VFD
Speed set through keypad
Set frequency 0.00 Hz
DC bus voltage
615.3 V
Input 0000000000000000
Note: When setting the value, you can press
All digits are
blinking
Note: When setting the value, you can press
press

5.3.3 How to set the VFD user password

The VFD provides the user password protection function. When you set P07.00 to a
non-zero value, the value is the user password. If password protection is enabled,
"00000" is displayed when you press the PRG/ESC key again to enter the function code
editing interface. You need to enter the correct user password to enter the interface.
To disable the password protection function, you need only to set P07.00 to 0.
202403 (V1.0）
Figure 5-4 Modifying a parameter (LCD)
P00
PRG
ESC
Basic functions
PRG
ESC
P00.05
Speed set
through keypad
Figure 5-5 Modifying a parameter (LED)
PRG
ESC
PRG
The ones place is
ESC
blinking
The ones place is blinking
to modify the value.
+
P00.00
DATA
ENT
Speed control
mode
PRG
ESC
Max. output
frequency
DATA
ENT
50.00 Hz
to shift the blinking place, and press
DATA
ENT
PRG
The ones place is
ESC
blinking
DATA
ENT
to shift the blinking place, and
Keypad instruction
P00.04
Max. output
frequency
DATA
PRG
ENT
ESC
Max. output
frequency
40.00 Hz
+
to modify the value.
The ones place is
blinking
DATA
PRG
ENT
ESC
32