Table of Contents
Advertisement
Working From the Device Communication Tab
Figure 3-9.
Device Communication setup
screen.
Configuring Multiple Analyzers
Use the Device Communication tab to set the analyzer's communication
parameters to agree with the PC settings when controlling analyzers in a daisy
chain.
Changing Communication Parameters
•
•
•
•
PN 583054901, Rev YA
For initial setup of PC communication parameters, use the Setup but-
ton on the General tab.
Change the ANALYZER parameter(s) first.
Click Apply to confirm the change. This may cause the analyzer to go off-
line.
Change the PC settings or physical wires/cables.
Reset the analyzer by recycling power.
|
Controller/Interface
3-19
Advertisement
Table of Contents
