Table of Contents
Advertisement
Settings: Configuration
Use the Configuration display window to identify system and communication
settings.
Ethernet
•
DHCP (Dynamic Host Configuration Protocol ) Enabled
IP address is obtained from a DHCP server on the network. If no DHCP
server is found, it defaults to 169.254.1.1
•
IP Address
Cannot be modified when DHCP is checked. When DHCP is not checked a
static IP address can be assigned.
•
IP Subnet Mask
Defines the subnet to which the analyzer belongs. You can communicate with
devices in the same Subnet locally without going through a router.
•
Gateway or "Router" (optional)
Allows local network traffic to be sent to another network. Setup this
parameter only if communicating from outside the internal network.
•
MAC (Media Access Control) Address
Identifies your computer's unique physical address. This is a unique ID
assigned at the factory.
|
Web Interface
5-13
Advertisement
Table of Contents
