Devicecontrol - IAI SW-4000TL-10GE User Manual

SW-4000TL-10GE | SW-4000TL-SFP | User Manual (2.0)

DeviceControl

Display/configure information related to the device.
Device Control Item
DeviceVendorName
DeviceModelName
DeviceManufacturerInfo
DeviceVersion
DeviceFirmwareVersion
DeviceFpgaVersion
DeviceSerialNumber
DeviceUserID
DeviceSFNCVersionMajor
DeviceSFNCVersionMinor
DeviceSFNCVersionSubMinor
DeviceManifestEntrySelector
DeviceTLType
DeviceTLVisionMajor
DeviceTLVisionMinor
Device TL Version Sub Minor
Device Link Selector
Device Link Speed (Bps)
Device Link Heartbeat Mode
Device Link Heartbeat Timeout
(us)
Device Stream Channel Count
Device Event Channel Count
DeviceReset
DeviceTempeatureSelector
DeviceTemperature
Setting Range
"JAI
-
Corporation"
"SW-4000TL-
-
SW-4000TL-
"See the
-
possibilities"
-
-
-
Any
- 2
- 3
- 0
- 1
- GigE Vision
- 2
- 0
- 1
- 0
-
Off
On
On
500000 ~ 120000000 3000000
-
-
- -
- Mainboard
-
- 68 -
Setting List (Feature Properties)
Default
Display the manufacturer name.
10GE"
Display the model name.
SFP
Display the manufacturer information.
- Display the hardware version.
- Display the firmware version.
Display the FPGA version.
- Display the device ID.
- Set the user ID (16bytes) for the camera.
Display the SFNC Major version.
Display the SFNC Minor version.
Display the SFNC Sub Minor version
Display information on valid XML file.
Display type of transport layer.
Display the Major version of transport layer.
Display the Minor version of transport layer.
Display the Sub Minor version of transport layer.
Select I/F for control. (0 fixed)
- Display Link speed.
Set the mode of Link heartbeat.
Set the time of heartbeat timeout.
- Display the number of stream channels.
- Display the number of event channels.
Reset the device. (After the camera receives this
command, it returns an ACK response. Then,
execute reset.)
Select the area of the camera's interior for which to
display the temperature sensor's reading. (fixed
Mainboard)
- Display the internal temperature (°C) of the camera.
Description