Table of Contents
Advertisement
SW-4000TL-10GE | SW-4000TL-SFP | User Manual (2.0)
Electronic Shutter
Related Setting Items:
When you use this function, you can set the exposure to a preconfigured accumulation time,
regardless of the line rate.
Variable range: 3 μs to 15.149 ms
l
Variable unit: 0.01 μs (1clk)
l
Supported operation modes: When Trigger Mode ON, Exposure Mode Timed
l
Caution:
In "Trigger Mode Off, Exposure Mode Timed" mode, the line rate configured will be
the maximum value at which the shutter operates. However, in "Trigger Mode ON, Exposure
Mode Timed" mode, the input trigger period will be the maximum value.
Note: You can also save the setting, and have it applied whenever the power is subsequently
turned on, but this requires additional operations.
ExposureActive (EEN) Function
Related Setting Items:
Perform external output for the timing at which video is accumulated to the sensor.
The signal is output to the DC IN / TRIG IN connector (12-pin round) or AUX connector.
Example: Output to the DIGITAL I/O-1 video output connector (Camera Link)
AcquisitionControl
AcquisitionControl
- 48 -
Main Functions
Advertisement
Table of Contents
