Specifications - IAI SW-4000M-PMCL User Manual

Specifications

Image sensor
Camera Link clock
Line rate
Video S/N ratio
PRNU
DSNU
Gain
Black level
(user settings)
Image output
Variable line rate
Electronic shutter
Test pattern
Synchronization
Image processing
Operation mode
Trigger inputs
Synchronous output (when
the terminal is open)
Communication interface
Field update
*
At the shortest line period (5 μs), the minimum value is 1.2 μs.
Model
Effective pixels
Pixel size
31.70/42.41/63.39/84.82 MHz
66 Hz - 199.5 kHz
60 dB or more (when Gain = 0 dB) at 10-bit
Post-correction: Within ±5% (during 100% output)
Post-correction: Within ±5% (during 0% output)
Analog Base Gain: 0 dB, 6 dB, 9.54 dB, 12 dB
Digital: x1 to x16 (0 dB to +24 dB)
Manual
-133 to +255 LSB (during 12-bit)
Default setting: Output black level (33LSB at 12-bit)
Digital video output (Camera Link)
Base: 1 × 2, 1 × 3
Medium: 1 × 4
Full: 1 × 8 (8-bit)
80bit: 1 × 8 (10-bit), 1 × 10 (8-bit)
Factory default values: 1 × 2, 8-bit
Supported (for Exposure Mode OFF mode / internal trigger mode or Shutter
select mode / internal trigger mode)
Variable range: 66 Hz to 200 kHz
Variable unit: 10 ns
The black level may vary with longer line rates, due to the increase in dark
currents.
Supported (during shutter select mode)
Variable range: 1.8 µs* to 15.148 ms
Variable unit: 1.0 µs
Available
1: Gray 1
2: Gray 2
3: White (890LSB)
Internal
1 Pixel sensitivity correction: Pixel correction (DSNU, PRNU)
2 Shading correction: ON/OFF switchable
Flat Field correction possible.
3 LUT/Gamma function: 1.00 (OFF) / 0.45 / User (LUT) selectable
When set to User, table data can be applied from externally.
Table data can be configured individually.
• Exposure Mode OFF mode (Internal/External trigger)
• Shutter select mode (Internal/External trigger)
• PWC (External trigger)
12-pin: 3.5 ± 1.5 V (p-p) TTL input
Camera Link: LVDS (CC1)
Positive / negative logic switchable.
Minimum trigger width: EPS 3 µs or more / PWC 3 µs or more
Use either 12-pin or Camera Link for trigger inputs.
Camera Link • LVAL (Camera Link Tx24)
• DVAL (Camera Link Tx25)
• EEN (Camera Link Tx26)
12-pin • XEEN (negative logic) 4.0 Vp-p (when there is no
termination)
EIA-644: Camera Link CC1
RS-232C: 12-pin
Communication rate: 9600 bps (Default), 19200bps, 38400bps, 57600bps,
115200bps
Supported
— 37 —
SW-4000M-PMCL
ELITE 4K 1V2
4096(H)
A: 7.5 µm × 7.5 µm
B: 7.5 µm × 10.5 µm