Removing And Replacing The Serial Port Blank - HPE ProLiant ML30 Gen10 Plus Maintenance And Service Manual

Removing and replacing the serial port blank

Removing and replacing the serial port blank
Prerequisites Prerequisites
Before you perform this procedure, make sure that you have a spudger or any small prying tool available.
Procedure Procedure
1. Power down the server.
2. Remove all power:
a. Disconnect each power cord from the power source.
b. Disconnect each power cord from the server.
3. Disconnect all peripheral cables from the server.
4. Remove the serial port blank:
a. Use a plastic spudger to pry the blank from the rear panel (callout 1).
b. Remove the blank (callout 2).
Results Results
To replace the component, reverse the removal procedure.
Removing and replacing the iLO dedicated network port blank Removing and replacing the iLO dedicated network port blank
Prerequisites Prerequisites
Before you perform this procedure, make sure that you have a spudger or any small prying tool available.
Procedure Procedure
1. Power down the server.
2. Remove all power:
a. Disconnect each power cord from the power source.
b. Disconnect each power cord from the server.
3. Disconnect all peripheral cables from the server.
4. Remove the iLO dedicated network port blank:
HPE ProLiant ML30 Gen10 Plus Server Maintenance and Service Guide 115