Installing The Processor - HPE ProLiant ML30 Gen10 Plus Maintenance And Service Manual

Installing the processor

Installing the processor
Prerequisites Prerequisites
Review the processor cautions .
Before you perform this procedure, make sure that you have the following items available:
T-15 Torx screwdriver
1.0 gm (0.5 ml) or two 0.5 gm (0.25 ml) of thermal grease
About this task About this task
CAUTION: CAUTION:
A discharge of static electricity from a finger or other conductor might damage system boards or other static-sensitive
devices. To prevent damage, observe antistatic precautions.
CAUTION: CAUTION:
THE PINS ON THE PROCESSOR SOCKET AND ON THE PROCESSOR ARE VERY FRAGILE AND EASILY DAMAGED. Any THE PINS ON THE PROCESSOR SOCKET AND ON THE PROCESSOR ARE VERY FRAGILE AND EASILY DAMAGED.
damage to them might require replacing the system board.
Procedure Procedure
1. Do not touch the socket contacts or the bottom of the processor.
HPE ProLiant ML30 Gen10 Plus Server Maintenance and Service Guide 83