Removing And Replacing The Serial Port - HPE ProLiant DL360 Maintenance And Service Manual

Removing and replacing the serial port

Removing and replacing the serial port
Procedure Procedure
1. Power down the server.
2. Remove all power:
a. Disconnect each power cord from the power source.
b. Disconnect each power cord from the server.
3. Do one of the following:
a. Extend the server from the rack .
b. Remove the server from the rack .
4. Remove the access panel .
5. Remove all riser cages .
6. Remove the switch and then disconnect the cable.
Removing and replacing the serial port 141