HPE ProLiant ML30 Gen10 Plus Maintenance And Service Manual page 99

8. Disconnect the M.2 SATA SSD cable .
9. Remove the PCI blank retainer.
10. Remove the add-in card.
11. Remove the M.2 SATA SSDs from the add-in card.
Retain these SSDs for installation onto the new add-in card.
Results Results
To replace the component, reverse the removal procedure.
Removing and replacing the M.2 SATA SSD on the add‑in card Removing and replacing the M.2 SATA SSD on the add
Prerequisites Prerequisites
in card
HPE ProLiant ML30 Gen10 Plus Server Maintenance and Service Guide 99