HPE ProLiant ML30 Gen10 Plus Maintenance And Service Manual page 48

CAUTION: CAUTION:
A discharge of static electricity from a finger or other conductor might damage system boards or other static-sensitive
devices. To prevent damage, observe antistatic precautions.
CAUTION: CAUTION: To prevent improper cooling and thermal damage, do not operate the server unless all bays are populated with
either a component or a blank.
Procedure Procedure
1. Back up all server data on the drive .
2. Remove the front bezel .
3. Observe the drive LED status and determine if the drive can be removed.
4. Remove the drive.
Results Results
To replace the component, reverse the removal procedure.
Removing and replacing a hot-plug SFF SAS or SATA drive Removing and replacing a hot-plug SFF SAS or SATA drive
About this task About this task
HPE ProLiant ML30 Gen10 Plus Server Maintenance and Service Guide 48