Front Panel Led Power Fault Codes - HPE ProLiant ML30 Gen10 Plus Maintenance And Service Manual

Item Item Description Description
1
1 Health LED
2 Power On/Standby button and
system power LED
When the two LEDs described in this table flash simultaneously, a power fault has occurred. For more information, see Front panel
1
LED power fault codes.
If the health LED indicates a degraded or critical state, review the system Integrated Management Log (IML) or use HPE iLO to review
2
the system health status.
Facility power is not present, power cord is not attached, no power supplies are installed, power supply failure has occurred, or the
3
front I/O cable is disconnected.
Subtopics Subtopics

Front panel LED power fault codes

Front panel LED power fault codes
Front panel LED power fault codes Front panel LED power fault codes
The following table provides a list of power fault codes, and the subsystems that are affected. Not all power faults are used by all servers.
Status Status
Solid green
Flashing green
Flashing amber
Flashing red
Solid green
1
Flashing green
Solid amber
Off
Definition Definition
Normal
iLO is rebooting
2
System degraded
2
System critical
System on
Performing power-on sequence
System in standby
3
No power present
HPE ProLiant ML30 Gen10 Plus Server Maintenance and Service Guide 143