Dimm Slot Location - HPE ProLiant ML30 Gen10 Plus Maintenance And Service Manual

Position Position Default Default Function Function
1
S1 Off
S2 Off Reserved
S3 Off Reserved
S4 Off Reserved
1
S5 Off
1 , 2 3
S6 Off
S7 Off Reserved
S8 Off Reserved
S9 Off Reserved
S10 Off Reserved
S11 Off Reserved
S12 Off Reserved
To access the redundant ROM, set S1, S5, and S6 to On.
1
When the system maintenance switch position 6 is set to the On position, the system is prepared to restore all configuration settings
2
to their manufacturing defaults.
When the system maintenance switch position 6 is set to the On position and Secure Boot is enabled, some configurations cannot be
3
restored. For more information, see Configuring the server.

DIMM slot location

DIMM slot location
The arrow points to the front of the server.
Off—iLO 5 security is enabled.
On—iLO 5 security is disabled.
Off—Power-on password is enabled.
On—Power-on password is disabled.
Off—No function
On—Restore default manufacturing settings
HPE ProLiant ML30 Gen10 Plus Server Maintenance and Service Guide 148