HPE ProLiant ML30 Gen10 Plus Maintenance And Service Manual page 108

a. Disconnect each power cord from the power source.
b. Disconnect each power cord from the server.
3. Disconnect all peripheral cables from the server.
4. Do one of the following:
If the server is in tower mode, place the server on a flat, level surface with the access panel facing up.
If the server is in rack mode, remove the server from the rack .
5. Remove the access panel .
6. Unplug the USB device from the USB port.
Results Results
To replace the component, reverse the removal procedure.
HPE ProLiant ML30 Gen10 Plus Server Maintenance and Service Guide 108