HPE ProLiant ML30 Gen10 Plus Maintenance And Service Manual page 49

CAUTION: CAUTION:
A discharge of static electricity from a finger or other conductor might damage system boards or other static-sensitive
devices. To prevent damage, observe antistatic precautions.
CAUTION: CAUTION: To prevent improper cooling and thermal damage, do not operate the server unless all bays are populated with
either a component or a blank.
Procedure Procedure
1. Back up all server data on the drive .
2. Remove the front bezel .
3. Observe the drive LED status and determine if the drive can be removed.
4. Remove the drive.
Results Results
To replace the component, reverse the removal procedure.
Removing and replacing drive blanks Removing and replacing drive blanks
About this task About this task
CAUTION: To prevent improper cooling and thermal damage, do not operate the server unless all bays are populated with CAUTION:
either a component or a blank.
Procedure Procedure
HPE ProLiant ML30 Gen10 Plus Server Maintenance and Service Guide 49