HPE ProLiant ML30 Gen10 Plus Maintenance And Service Manual page 72

b. Disconnect each power cord from the server.
3. Disconnect all peripheral cables from the server.
4. Do one of the following:
If the server is in tower mode, place the server on a flat, level surface with the access panel facing up.
If the server is in rack mode, remove the server from the rack .
5. Remove the access panel .
6. Remove the DIMM.
a. Open the DIMM slot latches (callout 1).
b. Lift the DIMM out of the slot (callout 2).
HPE ProLiant ML30 Gen10 Plus Server Maintenance and Service Guide 72