HPE ProLiant ML30 Gen10 Plus Maintenance And Service Manual page 101

6. Remove the access panel .
7. If installed, remove the air baffle .
8. Disonnect the M.2 SATA SSD cable .
9. Remove the PCI blank retainer.
10. Remove the add-in card.
11. Remove the M.2 SATA SSDs from the add-in card.
Results Results
To replace the component, reverse the removal procedure.
HPE NS204i-p NVMe OS Boot Device HPE NS204i-p NVMe OS Boot Device replacement replacement
HPE ProLiant ML30 Gen10 Plus Server Maintenance and Service Guide 101