Environmental Specifications - HPE ProLiant ML30 Gen10 Plus Maintenance And Service Manual

Item Item Cable label Cable label
1 HDD PWR (PDB)
2 ODD PWR
3 P4
4 LTO PWR
5 P2
6 NHP PWR
7 BP HP PWR
Specifications Specifications
Subtopics Subtopics

Environmental specifications

Environmental specifications
Mechanical specifications Mechanical specifications
Power supply specifications Power supply specifications
Environmental specifications Environmental specifications
Specifications Specifications
Temperature range* Temperature range*
Operating
Nonoperating
Relative humidity (noncondensing) Relative humidity (noncondensing)
Operating
Nonoperating
Altitude Altitude
Operating
Nonoperating
Standard operating support Standard operating support
10° to 35°C (50° to 95°F) at sea level with an altitude derating of 1.0°C per every 305 m (1.8°F per every 1,000 ft) above sea level to a
maximum of 3,050 m (10,000 ft), no direct sustained sunlight. Maximum rate of change is 20°C/hr​ (36°F/hr). The upper limit and rate of
Connection Connection
Connects to RPS power distribution board
Connects to the optical drive
Connects to the LTO/RDX power extension cable
LTO/RDX power connector
Connects to the LTO/RDX power extension cable
Connects to the SATA-power splitter cable in the 4 LFF non-
hot-plug drive configuration
Connects to the 4 LFF / 8 SFF hot-plug drive backplane
Value Value
—
10°C to 35°C (50°F to 95°F)
-30°C to 60°C (-22°F to 140°F)
—
8% to 90%
28°C (82.4°F) maximum wet bulb temperature, noncondensing
5% to 95%
38.7°C (101.7°F) maximum wet bulb temperature, noncondensing
—
3050 m (10,000 ft)
This value may be limited by the type and number of options installed. Maximum allowable
altitude change rate is 457 m/min (1,500 ft/min).
9144 m (30,000 ft)
Maximum allowable altitude change rate is 457 m/min (1,500 ft/min).
HPE ProLiant ML30 Gen10 Plus Server Maintenance and Service Guide 177