HPE ProLiant ML30 Gen10 Plus Maintenance And Service Manual page 80

and 3).
c. Lift the heatsink away from the system board (callout 4).
d. Place the heatsink on a flat work surface with its contact side facing upward.
8. Use an alcohol wipe to remove the existing thermal grease from the heatsink.
Allow the alcohol to evaporate before continuing.
9. Open the processor load plate:
a. Push the hinge lever down to unclamp it, and then pivot it to the vertical position (callout 1).
b. Open the processor load plate (callout 2).
10. Do not touch the socket contacts or the bottom of the processor.
HPE ProLiant ML30 Gen10 Plus Server Maintenance and Service Guide 80