The procedure is complete.
Processor replacement
Processor replacement
Subtopics
Subtopics
Processor cautions
Processor cautions
Removing the processor
Removing the processor
Installing the processor
Installing the processor
Processor cautions
Processor cautions
CAUTION: To avoid damage to the processor or system board, only authorized personnel should attempt to replace or
CAUTION:
install the processor in this server.
CAUTION:
CAUTION: If installing a processor with a faster speed, update the system ROM before installing the processor.
To download firmware and view installation instructions, see the Hewlett Packard Enterprise Support Center website
CAUTION:
CAUTION: THE CONTACTS ARE VERY FRAGILE AND EASILY DAMAGED.
THE CONTACTS ARE VERY FRAGILE AND EASILY DAMAGED. To avoid damage to the socket or processor, do
not touch the contacts.
Removing the processor
Removing the processor
Prerequisites
Prerequisites
Review the processor cautions .
Before you perform this procedure, make sure that you have the following items available:
T-15 Torx screwdriver
Alcohol wipe
If you are not immediately installing the new processor, make sure that you have the protective cover for the processor socket.
About this task
About this task
CAUTION:
CAUTION:
A discharge of static electricity from a finger or other conductor might damage system boards or other static-sensitive
devices. To prevent damage, observe antistatic precautions.
Procedure
Procedure
Hewlett Packard Enterprise Support Center website .
HPE ProLiant ML30 Gen10 Plus Server Maintenance and Service Guide
78