Drive Replacement - HPE ProLiant ML30 Gen10 Plus Maintenance And Service Manual

Results Results
To replace the component, reverse the removal procedure.

Drive replacement

Drive replacement
Subtopics Subtopics
Removing and replacing a non-hot-plug LFF SATA drive Removing and replacing a non-hot-plug LFF SATA drive
Removing and replacing a hot-plug LFF SAS or SATA drive Removing and replacing a hot-plug LFF SAS or SATA drive
Removing and replacing a hot-plug SFF SAS or SATA drive Removing and replacing a hot-plug SFF SAS or SATA drive
Removing and replacing a non-hot-plug LFF SATA drive Removing and replacing a non-hot-plug LFF SATA drive
Prerequisites Prerequisites
Before you perform this procedure, make sure that you have a T-15 Torx screwdriver available.
About this task About this task
CAUTION: CAUTION:
A discharge of static electricity from a finger or other conductor might damage system boards or other static-sensitive
devices. To prevent damage, observe antistatic precautions.
Procedure Procedure
1. Back up all server data on the drive .
2. Remove the front bezel .
3. Power down the server.
HPE ProLiant ML30 Gen10 Plus Server Maintenance and Service Guide 45