Table of Contents
Advertisement
Key Operator Tools
B Enter a name for the adminis-
trator address.
Reference
P.303 "Entering and Modifying
Text"
C Press [OK].
F
Press [OK].
G
Press [OK].
9
H
Press [PrevMenu] twice.
I
Press [Exit].
Note
The standby display reappears.
286
Program Scan Area
(Setting the Scan Area)
This function requires the optional Func-
tion Upgrade Card.
If you register the scan area before-
hand, only the area of documents you
have specified will be scanned in and
sent.
Transmission time is shorter com-
pared to sending the whole page. This
feature is useful, for example, when
you do not need to send the whole
page, or when the page contains con-
fidential information.
Preparation
You must store the Scan Area fea-
ture in a User Function key ({F1} –
{F5}) beforehand. Press this key to
turn Scan Area on and off.
Transmitter
(This machine)
• Skip Length
The length that is not scanned
measured from the leading edge.
E.g. if you set it to 2 inch, the area 2
inch from the leading edge is not
scanned in.
• Scan Length
The length of the area to be
scanned. E.g. if you set it to 5 inch,
an area 5 inch long starting at the
end of the skip length will be
scanned.
Receiver
GFSKPS0N
Advertisement
Table of Contents
