Table of Contents
Advertisement
Note
If the "Fax Features" or "Key
Op. Tools" screen is shown,
press the {User Tools} key. If any
other display is shown, press
the {Clear Modes/Energy Saver}
key.
B
Press the {User Tools} key.
C
Enter the code for "Key Op.
Tools" with the number keys.
Then press the {#} key.
D
Enter the code for "System Set-
tings" with the number keys.
E
Enter the code for "File Reten-
tion" with the number keys.
Note
If the item you require is not
displayed, press [↑Prev.] or [↓N-
ext] until it is.
F
Press the 0 or 1 keys to select
the time or turn this feature off.
G
Press [OK].
H
Press [PrevMenu] twice.
I
Press [Exit] to return to standby
mode.
RTI/TTI
The RTI (Receive Terminal Identifica-
tion) is used to identify your machine
to the other party when communicat-
ing with machines of the same make.
The TTI (Transmitter Terminal Identi-
fication) is printed on the header of
every fax you send and aids the other
party identify your fax messages.
Reference
P.21 "Registering your RTI and TTI"
G3-1 Analog Line
You need to register the following
items before you connect the machine
to a G3 analog line:
• PSTN Line Type
Select whether the connected line
uses tone or pulse dialing.
• CSI (up to 20 digits)
The CSI (Called Station Identifica-
tion) is passed to the other party
when you send or receive a fax.
System Settings
9
243
Advertisement
Table of Contents
