Table of Contents
Advertisement
You can block out incoming messages
from certain fax machines by register-
ing them as Specified Senders. If a fax
machine from which you do not wish
to receive messages from tries to send
you a message, the line is disconnect-
ed immediately after the connection
is established. This feature is useful,
for example, if you wish to block out
junk faxes.
You can register the following items:
• Specified Senders (maximum 30
items, each G3 item can be up to 20
characters long, each G4 item can
be up to 24 characters long)
• Wildcards
Important
It is recommended that you print
the Sender/Authorized Reception
list keep it when you register or
change a sender.⇒ P.283 "Printing
the Specified Sender List"
Limitation
You cannot register a Specified
Sender who does not have an RTI
or CSI.
Note
You can choose to receive messag-
es from Specified Senders only, or
from all senders except those regis-
tered as Specified Senders. Adjust
this setting with the User Parame-
ters. When shipped, the default
setting is "Only Receive Messages
From Specified Senders".
You can edit these settings using
the same procedure as used for
registering them.
Setting up Authorized Reception
Reference
For how to delete Specified Send-
ers, see P.282 "Deleting Specified
Senders".
A
Follow steps A–D on "Opening the
Initial Set Up Menu" ⇒ ⇒ P.260. to
bring up the "Initial Set Up"
menu.
B
Enter the code for "Authorized
RX" with the number keys.
Note
If the item you require is not
shown, press [↑Prev.] or [↓Next]
until it is.
C
Press [Sender].
Note
If you do not wish to register a
Specified Sender, proceed to
step P.
D
Enter the code for "Program
Sender" with the number keys.
Initial Set Up
9
263
Advertisement
Table of Contents
