Table of Contents
Advertisement
Fax Features
Note
If a destination name is al-
ready
Quick Dial key, the name is
shown on the display. If you
wish to change this name,
press the {Clear} key and en-
ter another name.
Reference
P.303 "Entering and Modifying
Text"
C Press [OK].
The fax number and name are
displayed.
Label Insertion
If you turn this setting on, the label
stored for this Quick Dial will be
automatically stamped on the first
page of messages you send when
printed at the other end.
A Press [Label].
B Press the 0 or 1 keys to
choose on or off.
8
C Press [OK].
H
Press [OK].
The display in step F reappears.
182
registered
in
this
Note
If you press Cancel, the infor-
mation you have just entered is
deleted and the display in step
F reappears.
I
Press [PrevMenu] three times.
J
Press [Exit] to return to standby
mode.
Quick Dial List
Printing the Quick Dial list allows
you to check destinations registered
in Quick Dial keys.⇒ P.209 "Reports/
Lists"
Quick Dial Key and Function Key Label
(Quick Key Label)
You can print a template that can be
used to make labels for Quick Dial
and User Function keys. The template
will have destination or Group names
programmed in Quick Dials, and the
names of functions assigned to User
Function keys.
Note
A protective transparent film is at-
tached to the operation panel. Peel
off the film and stick the Quick Key
Label on the operation panel.
Cut out the Quick Key Label and
glue it onto the operation panel.
When you stick it on, avoid cover-
ing the sensor near Quick Dial 56
(right corner).
To print the label template, see
P.209 "Reports/Lists".
Advertisement
Table of Contents
