Table of Contents
Advertisement
Receiving a Fax Message
For example, if your machine has LG (8.5 × 14") L installed and you receive an
LT (8.5 × 11") L size message, check the LT column of the table below. The pa-
per size at the top has the highest priority. In this case, since LG (8.5 × 14") L is
higher priority than DLT (11 × 17") K, the message is printed on LG (8.5 × 14")
L.
Priority Table
Page Reduction
Reduction in Sub-scan Direction
Page Separation Threshold
3
Width or Length Priority
• KK and LL indicate that the message is split over two pages of paper with
the orientation and size shown.
Limitation
Paper placed in the bypass tray is not usually selected for printing a received
message.
The paper size used to print a received message may be different from the size
of the sent document.
Note
Widths that this machine can receive are A4, B4, LT, LG, and DLT. Any mes-
sages narrower than A4 or LT are sent as A4 or LT width with the length un-
changed.
102
Disabled
Enabled
20 mm
Width
Advertisement
Table of Contents
