Table of Contents
Advertisement
F Replace the screw you re-
moved in step A.
Replacing the Transfer Roller
A Open the transfer roller cover
upwards.
B Put on the two gloves packed
with the new maintenance kit
to prevent getting your hands
dirty (the old transfer roller
will be covered in toner).
C Hold both ends (green) of the
old transfer roller and lift it
out.
TKSM013N
D Hold both ends (green) of the
new transfer roller making
sure the gear area is on the left,
then push it in until it firmly
clicks into place.
TKSM040N
B
Firmly close the main side cover.
C
Clear the "PM Counter".
Reference
P.255 "Reset PM Counters"
Replacing the Stamp Cartridge
When the stamp mark begins to fade,
it is time to install a new stamp car-
tridge.
Note
Only use stamp cartridges de-
signed specifically for this ma-
chine.
Maintaining the Machine
TKSM050N
TKSM060N
315
11
Advertisement
Table of Contents
