Table of Contents
Advertisement
Sending a Fax Message
duced to a suitable width during
transmission.
A B
2
Important
If you turn this feature off, the
scale of the document is main-
tained and some parts of the image
may be lost when printed at the
other end.
A A
Note
You can switch this feature on and
off with the User Parameters(⇒
P.236). The default setting is on..
Duplex Original Settings
This feature lets you scan in each side
of a double-sided document, then
have both sides sent in a single opera-
tion.
Preparation
You need to store the Duplex Orig-
inal function in a User Function
key beforehand.
82
Transmitter
(This machine)
Receiver
Limitation
This feature is only available with
Memory Transmission.
A
Make sure the Memory Transmis-
sion indicator is lit.
A
B
Reduction
GFREDU0N
Note
If it is not, press the {Transmis-
sion Mode} key.
B
Press the {User Function} key with
the Duplex Original function
stored in it.
C
Set your double-sided document
with the front page face-up.
D
Adjust any scan settings as neces-
GFREDU1N
sary.
E
Dial the destination number.
F
Press the {Start} key.
Scanning of the front page will be-
gin.
When scanning has finished, the
following display will appear:
G
Set your document with the back
page face-up.
Advertisement
Table of Contents
