Table of Contents
Advertisement
Choosing the line (the {Line
Selection} key)
A Press the {Line Selection} Key to
select the line.
Choosing the line (the User
Function key)
A Press the User Function key
with the Line Select function
stored in it.
B Press 0 or 1 to select the line.
C Press [OK].
J
Press [Recv. Stn].
K
Specify the end receiver in one of
the following ways.
Note
Specify the transfer station
Quick Dial, Speed Dial or
Group with the end receiver
stored in it.
The destination specified as the
end receiver is passed to the
transfer station and sent to the
number stored in the transfer
station.
Specifying an End Receiver
Stored in a Quick Dial
A Press {#} then enter the num-
ber of the Quick Dial (2 digits).
Note
E.g. if the destination is
stored in the transfer sta-
tion's {Quick Dial 01}, enter
{#}{0}{1}.
To specify another end re-
ceiver, press [Add RcvStn].
If you press 0 or 1, you can
view and check end receivers
already stored. To delete the
displayed end receiver, press
the {Clear} key.
To cancel this Transfer Re-
quest, press [Cancel].
Specifying an End Receiver
Stored in a Speed Dial
A Press {#}{p} then enter the
Speed Dial code (2 digits).
Program/Delete Menu
191
8
Advertisement
Table of Contents
