Table of Contents
Advertisement
Receiving a Fax Message
When shipped, this feature is
turned off by default.⇒ P.236
"Changing the User Parameters"
How to make a Remote Transfer Request
(UUI)
This procedure describes how to
make a Transfer Request to this ma-
chine from the requesting party's ma-
chine.
3
A
Set your document and adjust any
scan settings as necessary.
B
Select G4 then enter the fax num-
ber of the transfer station.
C
Specify the UUI.
Note
E.g. on machines of this type,
press the {User Function} key as-
signed to Tone (UUI) then enter
the UUI.
D
Press the {Start} key.
Remote Transfer Example Input
• Destination (Transfer Station)
telephone number = 061234567
• Remote ID = 7777
• Transfer Request Result Report
return address = Speed Dial 01
• End Receivers = Quick Dial 02,
Speed Dial 03, Group 04
061234567• {#} 7777 {#} 24
{#}{p}{p}{p}{p} 01 {#} 02
{#}{p} 03 {#}{p}{p} 04
{#}{#}{#}
(entering the underlined parts
as the UUI)
Note
You can specify a maximum
of 30 end receivers.
96
ID Reception
If you wish to limit reception of mes-
sages to those from machines of the
same make and with the same Polling
ID, contact your service representa-
tive to turn this feature on.
JBIG Reception
The optional JBIG Unit or optional G3
Unit is required to use this function.
Use this feature to receive messages
sent to you using the high compres-
sion protocol known as JBIG.
Authorized Reception
This feature helps you to reject junk
mail. It lets you specify which termi-
nals you wish to receive fax messages
from; the others will be shut out. This
is useful if you are very annoyed with
someone.
To use this feature, turn Authorized
Reception on and register the Speci-
fied Senders.⇒ P.262 "Authorized Re-
ception"
Specified Tray
This function requires the optional Paper
Supply Unit.
If you store the fax numbers of other
fax machines from which you often
receive messages, you can have mes-
sages from these senders treated dif-
ferently. The numbers you store are
referred to in this manual as Specified
Senders.
This function lets you have messages
from Specified Senders, or messages
from all senders other than Specified
Advertisement
Table of Contents
