Ricoh Aficio FAX 5000L Operating Instructions Manual page 311

• You can use Scan Area with Mem-
ory Transmission (including Con-
fidential Transmission
Transfer Request Transmission),
Polling Transmission, Free Polling
Transmission, SUB Code Trans-
mission, and when registering
Auto Documents.
Limitation
You can only store one scan area.
The area up to about 0.08 inch from
the leading edge
scanned no matter how you set the
skip length.
The area up to about 0.12 inch from
the trailing edge
scanned no matter how you set the
skip length.
If you try and scan in a document
that is shorter than the skip length,
the operation is canceled and the
document is erased from memory.
Note
The skip length can be in the range
0–499 mm. The default when
shipped is 0 mm. However, the
area up to about 2 mm from the
leading edge cannot be scanned no
matter how you set the skip length.
The scan length can be in the range
0–499 mm. The default when
shipped is 0 mm. However, the
area up to about 5 mm from the
leading edge cannot be scanned no
matter how you set the scan
length.
We recommend that you specify a
slightly larger scan area (5 mm)
than is necessary to allow for the
scan margin of error.
Turn Skip Scan permanently on or
off with the User Parameters (⇒
P.236), or assign Skip Scan to a
User Function key as explained
above (⇒ P.211). When shipped,
this feature is turned off.
and
A
Follow steps A–D on "Opening the
Initial Set Up Menu" ⇒ ⇒ P.260. to
bring up the "Initial Set Up"
menu.
B
Enter the code for "Prog. Scan Ar-
ea" with the number keys.
cannot be
cannot be
C
Enter the skip length with the
number keys.
D
Press the 1 key to move the cur-
sor to the scan length.
Note
If the item you require is not
shown, press [↑Prev.] or [↓Next]
until it is.
Note
If you make a mistake, press the
{Clear} key and try again.
Initial Set Up
9
287