Table of Contents
Advertisement
Communication Information
C
Press the 0 or 1 key until the file
you want to print is shown. Then
press [Check].
D
Depending on the setting you
want to check or change, use one
of the following procedures.
5
Checking destinations
(Destination List)
A Enter the code for "Destination
List" with the number keys.
The total number of destina-
tions and the fax number or
each
shown.
Note
To see hidden destinations,
press [↑Prev.] or [↓Next].
132
destination's
name
Changing the transmission time
A Enter the code for "Change
Start Time" with the number
keys.
B Enter the transmission time (4
digits) with the number keys.
Use 24-hour or 12-hour format
depending on your area. For 12-
hour format, press [AM↔PM] to
switch between AM and PM.
Note
You can not specify a start
time more than 24 hours into
the future.
To start transmission imme-
diately, press [Immediate]. If
memory contains other files
queued
is
those files are sent first.
Re-sending a file
If you select the failed transmis-
sion file, you can resend it. This
feature allows you to transmit a fax
message again. You can choose to
have files that were not transmit-
ted successfully stored in memory
with the File Retention feature.
These files will be kept for either
up to 24 or 72 hours depending on
how you program File Retention
feature.⇒ P.242 "File Retention"
for
transmission,
Advertisement
Table of Contents
