Table of Contents
Advertisement
A
Make sure that the Memory
Transmission indicator is lit.
If it is not lit, press the {Transmis-
sion Mode} key.
B
Set your document.
Note
The document can be placed at
any time up until you press the
{Start} key.
Reference
P.35 "How to Set a Document"
C
Select any scan settings you re-
quire.
Reference
P.62 "Scan Settings"
D
Dial the destination number. If
you wish to send the same mes-
sage to more than one destina-
tion, press [Add] and dial another
destination. Repeat this step for
all destinations.
Note
If you make a mistake, press the
{Clear} key or {Stop} key and
try again. The {Clear} key de-
letes one character at a time, and
the {Stop} key deletes the whole
line.
When dialing with the number
keys or using Chain Dial(⇒
P.73), you can select the line
After transmission the machine
type (G3 or G4) before pressing
[Add] in step D.
If you do not set a document
within 1 minute of entering a
destination fax number, the
transmission is canceled.
If the "No Documents, No Dial"
function is turned on, you can-
not dial before setting your doc-
ument.⇒ P.81 "No Document,
No Dial"
Reference
P.67 "Dialing"
P.65 "Selecting the Line"
E
Press the {Start} key.
The machine starts scanning the
document.
The machine connects to the desti-
nation. The name or fax number
which is programmed as the RTI or
CSI in the other party's fax ma-
chine is shown on the display.
Reference
P.21 "Registering your RTI and
TTI"
Memory Transmission
47
2
Advertisement
Table of Contents
