Table of Contents
Advertisement
• Confidential Transmission
• SUB Code Transmission
• E-mail
Transmission
NIC Fax Kit required)
Limitation
You cannot specify the administra-
tor address using a Quick Dial or
Speed Dial.
Immediate Transmission is not
available when Backup Transmis-
sion is turned on.
If memory runs out while a mes-
sage is on transmission standby, or
cannot be sent documents, trans-
mission cannot take place.
Note
You check the result of a Backup
Transmission by reading the Mem-
ory Communication Result Report
(Memory Transmission).
A
Follow steps A–D on "Opening the
Initial Set Up Menu" ⇒ ⇒ P.260. to
bring up the "Initial Set Up"
menu.
B
Enter the code for "Backup File
TX" with the number keys.
Note
If the item you require is not
shown, press [↑Prev.] or [↓Next]
until it is.
C
Press the 0 or 1 keys to turn this
function on or off.
(optional
D
Press [Backup].
E
Enter the fax number of the back-
up destination (Administrator
Address).
Registering/Editing the
administrator name
A Press [Name].
Note
If the optional NIC Fax Kit is in-
stalled, you can press the User
Function Key ({F1}-{F5}) with
the Mail Address function reg-
istered in it and enter an e-mail
address. ⇒optional NIC Fax Kit
manual
Initial Set Up
9
285
Advertisement
Table of Contents
