Table of Contents
Advertisement
Sending a Fax Message
E
Dial the destination fax number
using the number keys.
F
2
Press the User Function key as-
signed with the Dial Options fea-
ture.
G
Enter the code for "SEP" with the
number keys.
H
Enter the SEP code with the num-
ber keys, then press [OK].
When a password (PWD) is
necessary
A Enter the code for "PWD" with
the number keys.
72
B Enter the PWD code then press
[OK].
I
Press [OK].
J
Press the {Start} key.
Sub-address
The optional G4 Unit is required to use
this function
Preparation
You need to assign the sub-ad-
dress feature to a User Function
key beforehand.⇒ P.211 "Assign-
ing User Function Keys", ⇒ P.185
"Registering Groups"
ISDN allows two or more terminals
(such as a fax and digital telephone)
to be connected to a single line. These
terminals are identified by their sub-
address numbers. If the terminals
connected to the line at a destination
are assigned sub-addresses, dialing a
sub-address allows you to direct your
fax message to a particular terminal at
the destination.
Advertisement
Table of Contents
